How to create bootable USB (pen drive)

How to create bootable USB (pen drive)

1. Plug your USB storage device and run CMD and execute the following commands one after another

1. Diskpart
Run Disk partition utility

2. List disk
To get disk index that is used to perform disk partitioning

3. Select disk 1
Selects disk to perform disk partitioning.

4. Clean
Clean the disk

5. Create partition primary
Creates a partition as primary partition.

6. Format recommended
Format your USB drive with recommended parameters(no need to worry about file system format)

7. Active
Set the partition as active to hold bootmanager

8.Exit
To quit Diskpart utility

2.After executing the above commands simply copy all windows 7 OS backup files . and paste to your USB drive

3.change your boot settings from BIOS
Set priority as 1st for your USB drive

Note(Do that only when problem is occur during booting time error)

*if your booting time the system will start several times that time some system are again load and recover repeted.

To avoid this problem.

If your system to restart you remove your USB feom your system.
The system will load normally and show windows
Setup click it. And insert your USB again while repeat the process at the system complete the installation.